SY-B1型自动分托机
Automatic Base Separation Machine SY-B1
1、 自动分托机主要用途及使用范围
1.Main application and using ranges of automatic base separation machine
本机主要适用于各种行业(食品、药品包装、饰品包装、通信产品塑料托盘等)的塑料托盘分离工序，特别针对水针生产包装过程中，安瓶印字前道工序，塑托分离，自动落托，通过传送带进入包装印字机，实现全自动包装流程。
Our machine is mostly used in pharmaceutical enterprises, especially in the packing process of squirt cut production. Before the printing of the ampoules, the plastic base is separated automatically and then falls onto the conveyor belt and then into the packing printer. Thus it achieves automated packing process..
2、 的性能特点
2. The performance features of automatic base separation machine
主要性能
Main features
1：自动上料，步进推托
Automatically loading materials and steeper pushing bases
2：吸附送托
Adsorption sending bases
3： 重叠盒托自动剔除
Automatically rejecting overlapped box bases
4： 透明盒托检测
Detection of transparent box bases
5： 无托自动报警
Automatic alarm when without base
6: 分托机无托印字机自动停止下瓶 (与SY-AA型印字机联动时)
Base separation machine and no-base printing machine automatically stop to load bottles (interlocking with SY-AA printing machine)
7: 印字机下瓶分托机自动给托 (与SY-AA型印字机联动时)
Printing machine automatically loading bottles and base separation machine automatically loading bases (interlocking with SY-AA printing machine)
8: 印字机停机后分托机自动延时停机，印字机开机后分托机自动启动 (与SY-AA型印字机联动时)
Base separation machine automatically delay to stop after the printing machine stops, base separation machine automatically starts after turning on the printing machine (interlocking with SY-AA printing machine)
9: 分托机与印字机速度自动匹配(与SY-AA型印字机联动时)
Speed of base separation machine and printing machine automatically matching (interlocking with SY-AA printing machine)
3、SY-B1型技术参数
3. Technical parameters of automatic base separation machine SY-B1
1)适用规格：
月饼托盘、山珍托盘、饼干托盘、蔬菜水果用透明盒、超市用塑料托盘、冷冻食品盘、糖果塑料托盘、生日蛋糕托盘、汤元托盘、松花蛋透明盒、鸡蛋透明盒、绿豆糕盒、冰激凌盒、刨冰碗、雪米饼盒等食品包装塑料托盒； 口服液塑料托盘、针剂塑料托盘、中药丸塑料托盘、保健品盒等药品包装塑料托盘； 礼品托盘、玩具托盘、工艺品托盘、日用品托盘、艺术蜡烛托盘，通讯产品托盘、电子零件托盘等各种日用品、化妆品用塑料托盒及工业品用透明塑料托盘。
(含两个规格键，特殊规格定做) Applicable specification: 1-20ml drug base (including two specification keys, customizing for special specifications)
2) 生产能力：1-20ml每分钟能达到130托
Production capacity: 1-20ml, 130 bases per minute
3)耗电量：1.3KW
Power consumption: 1.3KW
4)外形尺长(长×宽×台面高)米：1.75×1.35×(0.75-0.85)
Overall dimension (length × width ×table-board height) (m): 1.75×1.35× (0.75-0.85)
5)总重量：260公斤
Total weight: 260kg
6)压缩空气：不低于4kg/cm2
Compressed air: not lower than 4kg/cm2
7)塑料药托要求：
Requirements of plastic drug base:
1、边缘整齐规则、均匀 Neat and regular edge
2、无破损变形 No damage or deformation
3、边缘吸合面不少于3.5mm Edge of absorbing surface no less than 3.5mm
4、厚度不小于0.15mm no less than 0.15mm in thickness
5、重量不小于1.9g no less than 1.9g in weight
