良机节能68(88)系列制粒机 Liangji 68 (88) series power consumption saving pellet mill
优化环模主要技术参数和配置，同等功率产量显著提高。
安全销系统改成轴向过载保护系统，拆装方便，安全可靠。
传动轮改进，更换轴承油封快速方便,延长大轴承使用寿命。
下料斜槽改进，采用特殊结构设计，可直接进入冷却器，避免交叉污染。
喂料调质系统采用闭气装置，减少蒸汽的溢出，避免窜气；提高调质效率，使物料与蒸汽充分接触，提高熟化度3%。
采用主轴后轴承定位系统，避免主轴花键间隙造成晃动，制粒机主机电流平稳，延长压模压辊使用寿命。
抱箍采用凸缘式螺钉联接结构，联接可靠，提高抱箍使用寿命。
主传动采用进口轴承油封！
Optimized technical data for diesoutput is increased significantly.
Safety pin is changed to axle overload protection system; easily assembledisassemble, safedependable.
The driving wheel is advanced to make oil seal can be replaced easilyservice life of main bearing is extended.
The feeding chute is advancedpellets can enter cooler directly to avoid cross contamination
The shut off system for feederconditioner is used to reduce overflow of steam; cooking efficiency is increasedmakes materials contact with steam fully; the gelatinization can be increased 3%.
The position system by back bearings of main shaft is adopted to prevent vibration caused by splineensures current of main motor stableextends service life of rollersdies.
Protuberant screws are used to connect die clamps with advantages of stable operationlonger service life of die clamps.
The imported bearingsoil seal are adopted to guarantee longer service life.
