DTP系列脱胚破碴机

该机是我吸收意大利脱胚机的基础上在1996年自主研发设备，是集脱胚、破碴与一体的设备，以打、搓、揉的原理，进行玉米干法脱胚。该设备由数个齿板组成的固定齿圈中间装有一个可拆卸的转子，转子和机架分别安装于底座。转子上端的皮带轮通过皮带与电机相连。其转子在固定齿圈中可以转动，固定齿圈与转子并保持有一定间隙。转子由三块转盘和十二条打板组成。

This series of equipment, developed by our company independently in 1996 based on Italian degerming machine, has both degerming and breaking functions. Dry-type corn degerming is conducted on the principle of hitting and rubbing. The equipment is equipped with a fixed tooth ring which is made up of several toothed plates, with a dismountable rotor set in the middle. The rotor and rack are installed on the pedestal separately. The belt pulley on the rotor is connected with the motor via a belt. The rotor in the middle of the fixed tooth ring can rotate, and there is a certain space between the fixed tooth ring and the rotor. The rotor consists of three turntables and twelve plates.

特点：

Characteristics:

1、设备机身采用翻砂铸铁件，使用寿命长，设备运行平稳；

The equipment body is made of sand-cast pig iron, so the equipment has a long service life and can operate stably;

2、设备能耗低，后期使用成本低；

The equipment is featured with low energy consumption and low operation cost in the later period;

3、设备密封性好，加工过程中无尘粉外扬；

It is featured with satisfactory sealing effect, free of flying dust during processing;

4、设备采用拼装式打板，后期拆卸维修方便；

Split mounting type plate is adopted for the equipment, which provides convenience for later disassembly and maintenance;

技术参数：

Technical parameters:

技术参数

Technical parameters

型号

Model

产量（t/h）

Output (t/h)

动力（kw）

Power (kw)

质量（kg）

Mass (kg)

外形尺寸（长×宽×高）mm

Boundary dimension (L × W × H) mm

DTP45×72

2-3

5.5-7.5

1500

1150×900×1900

DTP75×100

4-6

18.5

2000

1550×1150×2100