2740F级-2740F级丙烯酸酯玻璃纤维漆管-,2740F级丙烯酸酯玻璃纤维漆管上海宜鸿电气科技有限公司手机版

详细介绍

产品名称：2740F级丙烯酸酯玻璃纤维漆管
产品型号：2740F级丙烯酸酯玻璃纤维漆管
产品说明

详细说明：

AG-601
（2732） B级丙烯酸酯玻璃纤维软管（符合沪Q/JBQRT7-2001）
Fiberglass Sleeving Coated With Acrylic Resin
（In According With Shanghai Q/JBQRT7-2001）

    B级丙烯酸酯玻璃纤维软管系采用无碱玻璃纤维编织成管，并涂以丙烯酸酯经加热烘干而成的绝缘软管，具有可靠的耐热性、良好的电性能、较好的柔软性和弹性，以及耐苯耐油等特性，适用于电机，电器、仪表、家用电器等装置的布线绝缘和机械保护。
   长度：1000（）毫米（连续长度由供需双方协议）
   外观：表面光洁；端部整齐

    Fiberglass sleeving coated with acrylic resin is manufactured with non-alkali fiberglass braided sleeving and coated with a layer of acrylicresin,and then thermoset to form insulating sleeving it possesses reliable heat resistance,good qualities of dielectric,fair softness and elasticity,benzene resustance and oil resistance.It can be used for wiring insulation and all mechanic protection for electrical instruments,wireless sets and domestic electrical appliances.
    Length:1000（）mm
    Appearance:Smooth surface,clear and neat end.

内径（mm） Inner Diametor		壁厚（mm） Wall Thickness
标称 Nominal	公差 Tolerance
0.5	±0.10	0.20～0.50
0.7	±0.10	0.20～0.50
1	±0.20	0.20～0.60
1.5	±0.20	0.20～0.60
2	±0.20	0.23～0.70
2.5	±0.20	0.23～0.70
3	±0.20	0.30～0.70
3.5	±0.25	0.30～0.70
4	±0.25	0.30～0.70
5	±0.25	0.30～0.70
6	±0.25	0.35～0.70
7	±0.25	0.37～1.00
8	±0.25	0.37～1.00
10	±0.50	0.47～1.00
12	±0.50	0.55～1.20

性能指标 Property requirements

性能Property	指标Requirements
耐油 Oil resistance	软管在105±2℃的变压器油中浸24小时，漆膜不应于玻璃丝管脱开或产生开裂，允许漆管颜色变深。 The coating should not crack or appear detached after the sleeving has been dipped in transformer oil for 24h at a temperature of 105±2℃.But the colour of the sleeving is allowed to grow darker.
耐苯 Benzene resistance	软管在常温甲苯液中浸4小时，漆膜不发粘或脱落。 The coating should not be sticky or show delamination when the sleeving has been kept in methylbenzene at a normal temperature for 4 hours.
击穿电压（不小于） Breakdown Voltage（Not lower than）	常态时under normal:2.5kv 受潮时afer dampening:1.2kv 缠绕后after winding:1.5kv

产品简介

详细介绍