GB30BGF30B2高速粉碎机组

本粉碎机组由GF30B粉碎机的吸尘器有机结合起来，采用垂直下出料设备，使某些流动性较差的料粉碎后出料流畅机内无积粉现象。
　　本机的工作原理是物料进入粉碎室在高速旋转的活动齿盘与固定齿盘受齿的冲击的作用下被粉碎，经筛网筛选后即成为所需的粉料。
　　本粉碎机组的粉碎机及吸尘器均采用优质不锈钢材料制成，经*工艺加工粉碎机机壳内壁光滑平整能使出粉更流畅，更便利壳内清洗工作。高速齿盘与活动牙齿经特种焊接，使活动牙齿坚固耐用安全可靠。本机符合药品生产的“GMP”要求。
　　本机因高速旋转，故高速齿盘经平衡测试整机在正常使用过程中达到平稳无震动，高速齿盘与传动轴连接采用锁紧装置在使用中更**可靠。
　　GF30B2型是在GF30B机组的基础上增加水冷却装置。


　　Set The Pulverizer Set consists of GF30BZ TYPE Pulverizer and duster perfectly.Being adapted the vertical low raw material discharging equipment,it makes some raw materials with poor fluidity after broken can be dischanged unblocked and no the phenomenon of accumulated powder.
　　Its principle of work is as follows:when raw material entered into the crushing chamber,it is broken under the impacting of movable and fixed gear disks that are rotated in high speed and then becomes the needed raw material through screen.
　　Its Pulverizer and duster are all made of qualified stainless steel.Its inner wall of the housing is smooth and level being processed through superior technology.Therefore it can make the powder discharging more flowing and is benefit to the work of clean too.The gear disk of high speed and movable teeth are welded through special welding,it makes the teeth is durable,safety and reliable.The machine is in conformity with the requirements of "GMP".
　　Through balance test of gear disk with high speed.It is proved that evne if this machine is rotated at high speed.It is stable and no vibration during the period of ordinary operation.Being adapted the interlock apparatus between gear disk with high speed and driving shaft,it is complete reliable in operation.
　　GF30B2 is added water cooling system basising on GF30B.