鲜枣果汁加工生产线500-2000kg/h保质期6-12个月

鲜枣果汁加工生产线500-2000kg/h保质期6-12个月

参考价: 面议

具体成交价以合同协议为准
2024-07-29 12:27:21
126
产品属性
关闭
舟山市经纬食品机械有限公司

舟山市经纬食品机械有限公司

免费会员
收藏

组合推荐相似产品

产品简介

500-2000kg/小时水果加工行业椰枣汁加工线/枣糖浆厂/枣醋厂对于鲜枣生产线,我们通常将干枣加入5倍的水进行预煮。

详细介绍

描述

500-2000kg/小时水果加工行业椰枣汁加工线/枣糖浆厂/枣醋厂

fruit machinery

对于鲜枣生产线,我们通常将干枣加入5倍的水进行预煮。

整个过程是这样的:

干枣洗涤–>分选–>预蒸煮–>制浆脱氮–>果汁储存–>果汁网滤–>果汁微滤–>巴氏杀菌–>杀菌–>灌装。

规格:

品牌名称:JWELL

型号:JW-SJP

容量2-50T/H

原材料

大号还是小号

(带或不带水果棒)

成品NFC鲜汁、浓缩汁、大枣清汁、大枣果肉

出汁率≥90%

成品糖度10-15(新鲜果汁)

成品无菌大包筒包装/玻璃瓶/PET瓶、屋顶纸箱/砖形纸箱

认证:ISO9001/CE/SGS

机器主要材料SUS304或SUS316

产地:中国

生产历史超过10年

电压380V 50Hz/110V 60hz/415V 50Hz

耗电量(Kw)节能型,约100-500kw,

操作员需要6-20人左右

冷却用水量约80-300M3

蒸汽消耗约300-5000T/H,

厂房面积约500-5000平方米

调试后12个月保修

技术参数

1、产品进料容量:500-2000kg/H椰枣加工线。

2、加工线类型:椰枣汁、椰枣糖浆生产线

3、原料:干椰枣

4、灌装机:塑料瓶:根据客户需要

Flow No. Name Size Main technical parameter Unit Qty
A: Palm date washing system
A-1 Rollarounds metering conveyor 1T/H Material: SUS 304 support, roller elevator, adjustalble evevating speed, machine size: 2000mmL*600mm W Unit 1
A-2 Bubble cleaning elevator 1T/H Material:SUS304 machine support, fruit washing pool, stainless steel baffle plates (the baffles are all with holes) are all made of SUS304, elevatoring speed is manually adjustable, with spray cleaning, the sloping bottom, hand hole, an overflow port, discharging port, the size is about: L*W*H=2500mm×1000mm×1200mm, the diameter of the baffle is: 3000mm×600mm Unit 1
A-3 Mesh Belt sorter 1T/H Material: SUS 304 support, food grade conveyor belt, working speed manually adjustable , with the stainless steel sorting table, machine size: 2000mm*1000mm Unit 1
A-4 Bubble cleaning elevator 1T/H SUS304 machine support, fruit washing pool, stainless steel baffle plates (the baffles are all with holes) are all made of SUS304, elevatoring speed is manually adjustable, with spray cleaning, the sloping bottom, hand hole, an overflow port, discharging port, the size is about: L*W*H=3000mm×1000mm×1200mm, the diameter of the baffle is: 5000mm×600mm Unit 1
Subtotal A:
B: Pulping system
B-1 Sprial pre-boiler 1T/H Material: SUS 304, U-shape tank, thermal insulation, with dimple pad , top open cover, easy to clean, and the boiling time is frequency adjustable( no less than 20min). capacity designed as to dry date. Unit 1
B-2 Temperature control system Spirax Sarce pressure reducing trap valve, German temperature testing system, Burkert angle seat valve, domestic famouse brand stop valve, filter and pressure gauge etc. Set 1
B-3 Stone washer 5T/H SUS304 support, with ABB motor Unit 1
B4 Screw conveyor for waste 1T/H SUS304, the diameter is 200mm, and the length is about 5000mm Unit 1
B-5 Buffer tank 1000L SUS304, double layer, with ladder, adjustable feet, and cone type cover, with flange type outlet at the bottom, electrode type liquid level, digital thermometer. With CIP cleaning balls, inlets for pure water and material Unit 2
B-6 Screw pump 5T/H The material contact parts are all made of food grade rubber, and the pressure of the outlet is 0.6MPa, frequency conversion speed regulation Unit 2
B-7 Double stage pulping machine 5T/H Main material for equipment is SUS304 stainless steel, material for frame support is SUS304 stainless steel rectangular steel, first step speed is 960r/min, mesh is 1.5mm, second step speed is 1200r/min, mesh is 0.8mm, variable frequency adjustable Unit 1
B-8 Tubular cooler 5T/H SUS304, one section, using tower water for cooling, and the difference of the material temperature is 70-50℃ Unit 1
B-9 Pulping platform Carbon steel support, anti slip stainless steel checkered plate, steps, guard bar, central drainage,L*W*H=8000mm×3000mm×2000mm Unit 1
Subtotal B:
C: Enzyme system
C-1 Enzyme adding system 100L/H The whole system include: Enzyme dissolving tank (SUS304, single layer, 100L, half open cover, Enzyme tank, paddle agitator), dosing pump (0-100L/H, stepless adjustable, 6 Bar), and with 2 prinkler heads 1/2” Set 1
C-2 Enzymolysis tank 5000L SUS304, PU insullation, airtight manhole, cone type cover, CIP cleaning balls on the top, digital thermometer, glass liquid level gauge, adjustable feet, breathing valve, off-center vertical agitator, and tie rod valveat the bottom Unit 4
C-3 Centrifugal pump 10T/H SUS304, lift 24m, machinery seal Unit 1
C-4 Enzyme platform SUS304, anti slip stainless steel checkered plate, steps, guard bar, central drainage, L*W*H: 9000mm×800mm×2500mm Set 1
Subtotal C:
D: First stage filtering and pasteurization system
D-1 Vacuum drum filter 5T/H Main material SUS304, with drum filter, with vacuum system, stainless steel collection vat for filter liquid, with waste slicker, screw waste conveyor, stainless steel operating platform, and electric control cabinet Set 1
D-2 Centrifugal pump 10T/H SUS304, lift 24m, machinery seal Unit 2
D-3 Storage tank 5000L SUS304, PU insullation, airtight manhole, cone type cover, CIP cleaning balls on the top, digital thermometer, glass liquid level gauge, adjustable feet, breathing valve, off-center vertical agitator, and tie rod valve at the bottom Unit 1
D-4 Pasteurizer 5T/H Tubular type, LOGO temperature auto control, mateial inlet temperature: 40-50degree, sterilizing temperature: 85-95degre, holding time 15 seconds, material outlet temperauter 45-55degree, with self CIP cleaning uint Unit 1
Subtotal D:
E:Clarification system
E-1 Circulation tank 10000L SUS304, PU insullation, airtight manhole, cone type cover, CIP cleaning balls on the top, digital thermometer, glass liquid level gauge, adjustable feet, breathing valve, off-center vertical agitator, and tie rod valve at the bottom Unit 1
E-2 Centrifugal pump 10T/H SUS304, lift 24m, machinery seal Unit 3
E-3 Cleaning water tank 10000L SUS304, PU insullation, airtight manhole, cone type cover, ladders, digital thermometer, glass liquid level gauge, over flow vent, adjustable feet and tie rodvalve at the bottom, with coil pipe heating device inside Unit 1
E-4 Horizontal spiral separator 5T/H Automatic deslagging, with the starting control cabinet, main and auxiliary motor are variable frequency adjustable Set 1
E-5 Screw conveyor for waste 1T/H SUS304, the diameter is 200mm, and the length is about 5000mm Unit 1
E-6 Buffer tank 500L SUS304, single layer, with ladder, adjustable feet, and cone type cover, with flange type outlet at the bottom, electrode type liquid level, digital thermometer, CIP cleaning balls and pure water and products inlets Unit 1
E-7 Ultra filter 5T/H SUS304, with cleaning equipments, fully-automatic control, the main control parts all adopts international brand, with feeding pump;
Inlet material brix: 12-15brix, filtering area: around 210sqm, operating temperature: 45-54degree, normal working pressure: inlet pressure:5 bar, outlet 1 bar. membrane filtering speed: about 2.8m/s
Unit 1
E-8 Platform for separator SUS304, anti slip stainless steel checkered plate, steps, guard bar, central drainage,

Machine size: L*W*H=5000mm×2500mm×2000mm

Unit 1
Subtotal E:
F. De-coloration system
F-1 Temporary storage tank 10000L SUS304, use PU as insullation, airtight manhole, cone type cover, CIP cleaning balls on the top, digital thermometer, glass liquid level guage, adjustable feet, breathing valve, and tie rod valve at the bottom Unit 1
F-2 Centrifugal pump 10T/H SUS304, lift 36m, machinery seal Unit 1
F-3 Resin regeneration tank 6000L SUS 316L, double layer thermal insulation, cone type cover, off-center vertical agitator, breathing valve, digital temperature meter, steam coil pipe heating. manual temperaure control, glass liquid level guage Unit 1
F-4 Acid dissolving tank 1000L SUS 316L, single layer, cone type cover, off-center vertical agitator, breathing valve, digital temperature meter, glass liquid level guage Set 1
F-5 Alkaline Recovery Tank 3000L SUS 316L, single layer, cone type vover, breathing valve, digital temometer, glass liquid level guage Unit 1
F-6 Centrifugal pump 10T/H SUS304, lift 36m, machinery seal Unit 1
F-7 Resin decoloraton unit 5T/H Material; SUS 304, 2 sets of 6m³ resin tank, easy to load materiall and unload material, the resin can be recoveable , and the resin to be confirmed after the experient by clients Unit 1
F-8 Duplex filter 10T/H SUS 304 stainless steel, mesh size: 200m, nylon filter bag, duplex type Set 1
F-9 Operating platform Operating platform for resin system Unit 1
Subtotal F:
G: Concentrate system
G-1 Storage tank 10000L SUS304, PU insullation, airtight manhole, cone type cover, CIP cleaning balls on the top , digital thermometer, glass liquid level guage, adjustable feet, breathing valve, and tie rod valve at the bottom Unit 1
G-2 Centrifugal pump 10T/H SUS304, lift 24m, machinery seal Unit 1
G-3 Triple effect falling film concentrator 4T/H Product contact: SUS 304, evaporation self control, brix/temperature are all fully controlled, falling film evaporator, downstream Set 1
G-4 Paper filtration 1T/H Plate precision filtration, 0.5um; SUS 304 plate material, paper filtration Unit 1
G-5 Tubular cooler 1T/H SUS304, one section, using tower water for cooling, and the temperature difference of the product is 60-40℃ Unit 1
G-6 Storage tank 3000L SUS304, three layers, with dimple jacket, PU insullation, airtight manhole, cone type cover, CIP cleaning balls on the top , digital thermometer, glass to show the level, adjustable feet, breathing valve, off-center vertical agitator, and tie rod valve at the bottom Unit 1
G-7 Rotary pump 1T/H The material contact part is SUS304, 0.6MPa, speed adjustable by hand wheel Unit 1
G-8 Operating platform SUS304, anti slip stainless steel checkered plate, steps, guard bar, central drainage,

Machine size: L*W*H=5000mm×800mm×2000mm

Unit 1
Subtotal G:
H:Sterilizing and filling system
H-1 Tube-in-tube sterilizer 1T/H Adopt the full automatic Simens PLC control,sterilizing temperature 105℃, 60s, material outlet temperature 30 ℃, UK Spirax Sarco steam control system, with CIP cleaning unit Unit 1
H-2 Degas unit 1T/H Automatic control, SUS304, with the degassing tank, vacuum pump, and material pump, also the aroma recovery unit;Labom Differential pressure sensor control level Unit 1
H-3 Bottle filling machine 1T/H Set 1
上一篇:植物精油提取设备,精油提取设备,植物精油提取 下一篇:如何选择合适的全自动核桃露饮料生产线设备
热线电话 在线询价
提示

请选择您要拨打的电话: