产品特色：

a.无段调整UV灯灯管输出照度

b.世界*UV灯灯管照度衰减自动抵补调整，免去手动校正与使用校正灯管。

c.USB随身碟接口记录多轨温湿度电压电流曲线文件（7轨物理量记录）。

d.具备伺服加湿系统，有效控制测试区光源发热负载。

e.灯管降温用水其水质、水温侦测。

f.UV灯灯管自行研发设计掌握关键技术。

g. 在短短的几天或几周内，Q8可再现在几个月甚至几年的户外使用所出现的破坏。

规范要求：

a.满足规范要求，试验结束方式可单选或复选[照射累积时间]与[照射累积量]。

b.雨淋水温符合规范要求可设定。

c.符合ISO、ASTM、 DIN、JIS、SAE、BS、ANSI、GM、U.S.GOVT等标准和国标。

安全保护：

a.试验结束待测品回常温保护机制

b.试验机台具备35点内外安全保护侦测（内部14点，外部31点）

控制器创新：

a.动态实时变化程序编辑曲线

b.温湿度设定条件防呆保护

c.机台重新来电试验曲线不中断

d.AI（人工智能）+Fuzzy（模糊控制）技术

e.繁简体中文、英文三种画面语系切换

f.控制系统实时显示多轨温湿度电压电流试验曲线[温度、湿度、黑球温度、水温、
  灯管电压、灯管电流、灯管照度]。

型号 Model

UV3

UV2

UV1

UV 照射 Exposure

●

●

●

冷凝 Condensation

●

●

●

光照控制 Irradiancs Control

●

●

可调光线 Adjustable irradiance

●

●

喷水 Water Spray

●

热冲击 Thermal Shock

●

自动侦路 Self-diagnostics

●

●

●

灯泡数量 Lamp Q'ty

紫外线灯管 8 支，备品 4 支 Ultravloiet lamp 6pcs, spares 4 pcs

记录器 Recorder

选配 （Optional）

辐射计 CR-10 Calibration Radiometer

选配 （Optional）

UV 温度 Temp

50 ℃ -75 ℃

冷凝温度 Condensation Temp

40 ℃ -60 ℃

测试容量 Test Capacity

48pcs 片/se  spray（ 75 x 150m m ）

50pcs片/basic （ 75 x 150m m ）

水凉及耗量 Water

蒸馏水每分钟 蒸馏水每日 8 公升

体积 Dimension（W x D x H）

137 x 53 x 136cm

重量 Weight

136kg

电源 Power

1 ψ ， 120V/60Hz,16A or 230V/50Hz, 9A,1800W（max）

通用

·                     ISO 4892-1 Plastics- Methods of exposure to laboratory light sources-Part 1: General Guidance

·                     ASTM G-151, Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

·                     ASTM G-154, Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Non-Metallic Materials

·                     British Standard BS 2782: Part 5, Method 540B （Methods of Exposure to Lab Light Sources）

·                     SAE J2020, Accelerated Exp. of Automotive Exterior Materials Using a Fluorescent UV/Condensation Apparatus

·                     JIS D 0205, Test Method of Weatherability for Automotive Parts （Japan）

·                     GB/T 16422.1，塑料实验室光源暴露试验方法 第1部分：总则

涂料

·                     ISO 11507, Paints & varnishes-Exposure of coatings to artificial weathering-Exposure to fluorescent UV and water

·                     ISO 20340, Paints & varnishes –Performance requirements for protective paint systems for offshore and
     related structures

·                     ASTM D-3794, Standard Guide for Testing Coil Coatings

·                     ASTM D-4587, Standard Practice for Light/Water Exposure of Paint

·                     US Government, FED-STD-141B

·                     US Govt., Federal Specification TT-E-489H, Enamel, Alkyd, Gloss, Low VOC Content

·                     US Govt., Federal Specification TT-E-527D, Enamel, Alkyd, Lusterless, Low VOC Content

·                     US Govt., Federal Specification TT-E-529G, Enamel, Alkyd, Semigloss, Low VOC Content

·                     US Govt., Federal Specification TT-P-19D Paint, Latex, Acrylic Emulsion, Ext. Wood & Masonry

·                     NACE Standard TM-01-84 Procedures for Screening Atmospheric Surfaced coatings

·                     GM4367M Topcoat Materials - Exterior

·                     GM 9125P Laboratory Accelerated Exposure of Automotive Material

·                     Korean Standard M5982-1990, Test Method for Accelerated Weathering

·                     Spanish Std, UNE 104-281-88 Accelerated Testing of Paints and Adhesives with Fluorescent UV Lamps

·                     Israeli Standard No. 330, Steel Windows

·                     Israeli Standard No. 385, Plastic Windows

·                     Israeli Standard No. 935, Road Marking Paint

·                     Israeli Standard No. 1086, Aluminum Windows

·                     NISSAN M0007, Fluorescent UV/Condensation Test

·                     JIS K 5600-7-8, Testing Methods for Paints

·                     MS 133: Part F16, Methods of Test for Paints and Varnishes: Part F16: Exposure of Coatings to Artificial Weathering- Exposure to Fluorescent UV and Water （ISO 11507）

·                     NBR-15.380 Paints for buildings–Methods for performance evaluation of paints for non-industrial buildings – Resistance to UV irradiation/water vapor condensation, by accelerated test

·                     prEN 927-6 Paints & varnishes–Coating materials and coating systems for exterior wood – Pt. 6: Exposure of wood coatings to artificial weathering using fluorescent UV and water

·                     GB/T 12967.4，铝及铝合金阳极氧化 着色阳极 氧化膜耐紫外光性能的测定

纺织品

·                     AATCC Test Method 186, Weather Resistance: UV Light and Moisture Exposure

·                     ACFFA Test Method for Colorfastness of Vinyl Coated Polyester Fabrics

印刷油墨

·                     ASTM F1945, Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting

橡胶

? GB/T 16585，硫化橡胶人工气候老化（荧光紫外灯）试验方法

电工电子产品

? GB/T 19394，光伏（PV）组件紫外试验

type the link here

粘合剂和密封剂

·                     ASTM C 1501, Standard Test Method For Color Stability of Building Construction Sealants as Determined byLaboratory Accelerated Weathering Procedures

·                     ASTM C-1184, Specification for Structural Silicone Sealants

·                     ASTM C-1442, Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus

·                     ASTM D-904, Standard Practice for Exposure of Adhesive Specimens to Artificial Light

·                     ASTM D-5215, Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives

·                     American Plywood Assn., Approval Procedures for Synthetic Patching Materials, Section 6

·                     Spanish Std, UNE 104-281-88 Accelerated Testing of Paints and Adhesives with Fluorescent UV Lamps

塑料

·                     ISO 4892 Plastics - Methods of Exposure to Laboratory Light Sources-Part 3: Fluorescent UV Lamps

·                     DIN 53 384, Testing of plastics, Artificial Weathering and Exposure to Artificial Light

·                     Spanish Standard UNE 53.104 （Stability of Plastics Materials Exposed to Simulated Sunlight）

·                     Israeli Standard No. 385, Plastic Windows

·                     JIS K 7350, Plastics - Methods of Exposure to Laboratory Light Sources-Part 3: Fluorescent UV Lamps

·                     ASTM D-1248, Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable

·                     ASTM D-4329, Standard Practice for Light/Water Exposure of Plastics

·                     ASTM D-4674, Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor
     Fluorescent Lighting and Window-Filtered Daylight

·                     ASTM D-5208, Standard Practice for Exposure of Photodegradable Plastics

·                     ASTM D-6662,  Standard Specification for Plastic Lumber Decking Boards

·                     ANSI C57.12.28 Specification for Accelerated Weathering of Padmounted Equipment Enclosure Integrity

·                     ANSI, A14.5 Specification for Accelerated Weathering of Portable Reinforced Plastic Ladders

·                     Edison Electrical Inst. Specification for Accelerated Weathering of Padmounted Equip. Enclosure Integrity

·                     Wisconsin Electric Power Specification for Polyethylene Signs

·                     GB/T 18950，橡胶和塑料软管 静态下耐紫外线性能测定

·                     GB/T 16422.3，塑料实验室光源暴露试验方法 第3部分：荧光紫外灯

屋顶材料

·                     ASTM D-4799, Test Method for Accelerated Weathering of Bituminous Roofing Materials

·                     ASTM D-4811, Standard Specification for Nonvulcanized Rubber Sheet Used as Roof Flashing

·                     ASTM D-3105, List of Test Methods for Elastomeric and Plastomeric Roofing & Waterproofing

·                     ASTM D-4434, Standard Specification for PVC Sheet Roofing

·                     ASTM D-5019, Standard Specification for Reinforced Non-Vulcanized Polymeric Sheet Used in Roofing Membrane

·                     ANSI/RMA IPR-1-1990 Req. for Non-Reinforced Black EPDM Sheet for Roofing Membrane

·                     ANSI/RMA IPR-2-1990 Req. for Fabric-Reinforced Black EPDM Sheet for Roofing Membrane

·                     ANSI/RMA IPR-5-1990 Req. for Non-Reinforced Non-Black EPDM Sheet for Roofing Membrane

·                     ANSI/RMA IPR-6-1990 Req. for Fabric-Reinforced Non-Black EPDM Sheet for Roofing Membrane

·                     British Standard BS 903: Part A54 Annex A & D, Methods of Testing Vulcanized Rubber

·                     CGSB-37.54-M, Canadian General Standards Board Spec. for PVC Roofing & Waterproofing Membrane

·                     DIN EN  534, Corrugated bitumen sheets

·                     EOTA TR 010, Exposure procedure for artificial weathering

·                     RMA Specification for Reinforced Non-Vulcanized Chlorosulfonated Polyethylene Sheet for Roofing Membrane

复合材料

·                     Israeli Standard No. 385, Anodic Coatings on Aluminum