KOMET  Vacuum shrink combination  

SD 520 B + ST 170

Standard equipment: stainless steel construction. Each chamber has one stainless steel sealing bar in front
660 mm. Sealing with airpressure support. High efficiency vacuum pump, 151 cbm/h. Cut-off sealing separate-ly adjustable. User friendly waterprove control board. Vacuum controlled by sensor. Automatic lid movement. Conveyors with height adjustment. Soft ventilation. Vacuum stop button.
Following options are possible: gas flushing, lid height 300 mm, vacuum pumps 205 cbm/h or 305 cbm/h.

Air pressure connection necessary!

Option

• Gas flushing for soft products
• Bi-active sealing
• Chamber hight 300 mm
  
   

Air pressure connection necessary!
Use a water softener to reduce water hardness!

ST 170: stainless steel construction. The automatic transport of the product in and out of the shrink tunnel
is controlled by a photocell.

• Water temperature is adjusted with a thermostat.
• Automatic water level regulation
• Steam exhaust release through the lid.
• Dipping time and dipping depth of water, also time for water to drip from product is adjustable.
• Slight on left side
• Pneumatic dipping cylinder
• Automatic filling of water
• User friendly construction, easy cleaning.
• Use of machine without dipping process is possible.
• Manual dipping is possible.
• Heating power 36 kW
• Dipping platform 820 x 450 mm

© KOMET Maschinenfabrik GmbH