Low temperature spray dryer-Experimental

Low temperature spray dryer-Experimental

参考价: 面议

具体成交价以合同协议为准
2018-06-11 10:31:07
776
产品属性
关闭
上海乔枫实业有限公司

上海乔枫实业有限公司

免费会员
收藏

组合推荐相似产品

产品简介

Low temperature spray dryer - Experimental machine At 30 ° C environment for spray drying, high efficiency, keep activity of material. The innovative microatomization structure of qiao feng

详细介绍

Low temperature spray dryer - Experimental  machineBrief description

1, Experimental low temperature spray dryer;

2, Processing volume 50-1000ml per hour;

3, Incoming wind temperature: 30-140 degrees;

4, It can be upgraded to a high and low temperature spray dryer;

Low temperature spray dryer - Experimental  machineExperimental Report

1,Sample introduction

Item

Equipment manufacturer

Treatment process

Sample#1

Tofflon

Freeze drying treatment,-18

Sample#2

Shanghai QiaoFeng

Low temperature spray drying,35

Sample#7

Fulaikang

Purchased capsules

Sample#8

Dongsheng

High temperature spray drying

Raw state of material

 

2,Precipitation state after centrifugation:

Condition: 0.1 g, above mentioned powder added SOD extract, 8000g / 10 mins; PDC reagent added and centrifuged, the situation is similar.

 

Conclusion

1, #1 and #8: The pellets in the upper layer of centrifugal precipitation are fine, but there are a few coarse particles in the bottom layer; The overall color of #1 is deeper than #8. Supernatant OD600 after centrifugation [~0.2-0.4].

2, #2: The particles are fine and there are no coarse particles. Supernatant OD600 after centrifugation [~0.2-0.4].

3, #7:The whole sample is rough, the texture is uneven, and the color is yellowing; Supernatant OD600 after centrifugation [~1.6-1.8].

3, Protein content of product 4, PDC enzyme activity measurement

 

 

 

5, SOD enzyme activity measurement

 

 

Low temperature spray dryer - Experimental  machine Conclusion

1, From the point of view of physical treatment (uniformity), the treatment effect of low temperature spray drying is the best, and the treatment effect of buying capsule inclusions is the worst. The largest number of colored extracts were purchased from capsule inclusions, and the components and functions of the extracts could not be determined.

2, Compared with dry weight, the PDC enzyme activity of freeze-dried material and low temperature spray drying treatment was the highest. The enzyme activity of high temperature spray drying is about 20% lower than that of low temperature spray drying. The enzyme activity of the capsule was the lowest, which decreased about 85% compared with the low temperature spray drying treatment. Compared with unit protease activity, although the activity of PDC was the highest in low temperature spray drying and freeze-dried treatments, in fact, the four groups of data were similar, reflecting the stability of PDC as the key enzyme for metabolism.

3, Compared with freeze-drying method, the enzyme activity of SOD in low temperature spray drying was the highest, which was about 25% higher than that of freeze-drying. The enzyme activity of the material in the capsule is close to that of the freeze-drying method. The lowest enzyme activity is high temperature spray drying, only about 50% of low temperature spray drying. Compared with the unit protease activity, the material in the capsule has obvious SOD activity, which is the most characteristic, but the activity is easily destroyed in ultrasonic treatment.

Brief conclusion:

1) the uniformity of sample treated by low temperature spray drying is optimal.

2) drying method has little effect on protein content.

3) the lyophilization treatment and the low temperature spray drying treatment had higher enzyme activity.

4) the content of protein in the capsule is the least, and it has high antioxidant activity and very low cellular activity.

5) the way the cells were broken by ultrasound was not conducive to the maintenance of cell activity and antioxidant activity.

          上海乔枫实业有限公司专业生产喷雾干燥机的厂家,核心产品包括有机溶剂喷雾干燥机,低温喷雾干燥机,造粒喷雾干燥机,气流式喷雾干燥机,小型沸腾干燥机,小型沸腾造粒机等;还有常规产品包括压力喷雾干燥机,离心喷雾干燥机,实验型喷雾干燥机等。

          上海乔枫经过多年的发展,不断的引进日本和德国的技术,克服了国内很多物料很难喷雾干燥的难题,比如颗粒很难均匀,平均颗粒15微米以下很难实现,平均颗粒在100微米以上,颗粒实心圆等难题。如果您需要超越您所期望的喷雾干燥设备,那么请;如果您需要一个可以长期合作与信任的工作团队,那么也请。我们期待您的来电。

上一篇:清除湿气的法宝——除湿机 下一篇:健康生活离不开除湿机,加湿机
热线电话 在线询价
提示

请选择您要拨打的电话: