江苏春晨电缆有限公司：https://www.foodjx.com/st161256/   适用于交流额定电压6000V及以下的电机绕组的引出连接用。

JBHF电机引接线使用特性：

电线导体的*允许工作温度应不超过70℃。具有良好的柔软性及耐热、耐溶剂性。

Method for judging breaking point of electric wire and cable JBHF电机引接线

数字万用表除了可以进行电压、电流、电阻、电容和晶体管等基本参数的测量外，还可以通过变通使用，使其功能得到进一步拓展，达到一表多用的目的。现给出用数字万用表判断电线电缆断点的方法。

Digital multimeter can in addition to measuring basic parameters of voltage and current, resistor, capacitor and transistor etc., but also through flexible use, its function can be further extended to a table for multiple purposes. A method for judging the breakpoint of the wire and cable is given by the digital universal meter.    JBHF电机引接线

当电缆或电缆的内部出现断线故障时，由于外部绝缘皮的包裹，使断线的确切位置不易确定。用数字万用表可以将这一难题轻松搞定。具体方法：把有断点的电线（电缆）一端接在220V市电的火线上，另一端悬空。将数字万用表拔至AC2V挡，从电线（电缆）的火线接入端开始，用一只手捏住黑表笔的笔尖，另一只手将红表笔沿导线的绝缘皮慢慢移动，此时显示屏显示的电压值大约为0.445V（DT890D型表所测）左右。当红表笔移动到某处时，显示屏显示的电压突然下降到0.0几伏（大约是原来电压的十分之一），从该位置向前（火线接入端）的大约 15cm处即是电线（电缆）断点所在。

When the cable or cable in the internal fault, due to the external insulation of the package, so that the exact location of the broken line is not easy to determine. With a digital table can be a difficult problem to get this problem. Concrete method: one end of the wire (cable) with a breakpoint is connected to the wire of the 220V city electricity, and the other end is hung up. The digital multimeter to pull the AC2V block from the wire (cable) FireWire access terminal, with a hand pinch black pen nib, the other hand the insulation red pen along the conductor slowly move, the display shows the voltage value is approximay 0.445V (DT890D scale test) about. When the pen moves to somewhere, voltage display suddenly dropped to 0 volts (about 1/10 of the original voltage), from the forward position (FireWire access terminal) about 15cm is the wire (cable) breakpoint.