FD（G）2、FD（Z）2放电线圈详细参数

• 本型放电线圈系单相户内、户外装置，环氧树脂绝缘的全封闭产品与高压并联电容器组并联连接，当电容器组与系统断开后，能在5s 内将电容器组上的剩余电压由 2 Un 降至50V 以下。在正常运行时，二次绕组可以作电压指示，剩余绕组接成开口三角，当电容器极间局部发生故障时，会产生零序电压，驱动继电保护装置。本型放电线圈特点为体积小，重量轻、无局部放电、抗过电压能力强、空载损耗小，空载电流小、防污能力强、使用安装方便、免维护，是替代油浸式放电线圈的产品。
• This type of discharge coil is single-phase,cast resin insulated used indoors or outdoors connected with high voltage parallel connection capacitor group.When the capacitor group is cut off from the system,it can take only five second to reduce the residual voltage of the capacitor group from 2Un to below 50V.When operating normal,the secondary winding is used as voltage indicator and the residual winding is connected as split triangle.If the pole of capacitor partial breaks down,it would bring the zero sequence voltage to drive relay protection gear.The product is small,light,little partial discharge energy and high resistance to over voltge,It is a new product for superseding the oil type discharge coil．

  型号说明 model meanings

  结构 Structure
  　　FD(G、Z)2/11/ 3-1.7-1(w) 型放电线圈为树脂绝缘全封闭结构，FD(G、Z)2/11/ 3-1 7-1WG 为户外干式瓷绝缘结构，采用环型铁芯。在同一个铁芯柱上同心地装有一次、二次线圈。
  　　The discharge coil,is casting resin insulated and fully enclosed type.The discharge coil is dry type and porcelain insulated.They annular core.The prinary winding and secondary winding are installed concentrically on the same iron-core pole.
  
  主要技术数据 main technical characterisetics

  型号Type	额定一次电压 Rated primary voltage (kV)	额定二次电压 Rated secondary voltage （KV）	额定二次输出及相应的准确级 Rated secondary output and combination accuracy classes(VA) cosφ=0.8(lagged)			剩余电压绕 组额定输出 Rated output of residual voltage winding(VA)	放电容量 Discharge capacity（Mvar）
  			0.2	0.5	1
  FD(G.Z)2/6.3/√3-1.7-1	6.3/√3	100/√3 或100 100/√3 or 100	20	50	100	100/3V 6P 50	1.7
  FD(G.Z)2/6.3/√3-1.7-1	6.3/√3
  FD(G.Z)2/11/√3-1.7-1	11/√3
  FD(G.Z)2/11/√3-2.5-1	11/√3						2.5
  FD(G.Z)2/11/√3-3.4-1	11/√3						3.4
  FD(G.Z)2/10-1.7-1	10	100	20	50	100		1.7
  FD(G.Z)2/10-2.5-1							2.5
  FD(G.Z)2/10-3.4-1							3.4
  FD(G.Z)2/6.3/√3-1.7-1 W(G)	6.3/√3	100/√3 或100 100/√3 or 100	20	50	100	100/3V 6P 50	1.7
  FD(G.Z)2/6.3/√3-1.7-1W(G)	6.3/√3
  FD(G.Z)2/11/√3-1.7-1W(G)	11/√3
  FD(G.Z)2/11/√3-2.5-1W(G)	11/√3						2.5
  FD(G.Z)2/11/√3-3.4-1W(G)	11/√3						3.4
  FD(G.Z)2/10-1.7-1W(G)	10	100	20	50	100		1.7
  FD(G.Z)2/10-2.5-1W(G)							2.5
  FD(G.Z)2/10-3.4-1W(G)							3.4

  
  外形及安装尺寸图 Outline and installation dimension