船用控制电缆CKVV/DACKVV82/DACKVV92/DA本产品适用于交流额定电压250V及以下的各种船舶及
海上石油平台等水上建筑物，用于对干扰不敏感的电路。 It is used for the circuit insensitive to interference
of AC rated voltage 250V or lower for ships, offshore
platform and other building over water.
一、生产执行标准 GB9332-88(IEC92-356) Executive standard: GB9332-88(IEC92-356)
二、使用条件 Working Condition
1、电缆的长期允许工作温度,聚氯乙烯绝缘电缆为70℃；
交联聚乙烯绝缘电缆为90℃；
2、敷设时电缆的zui小弯曲半径；
金属屏蔽铠装型（电缆外径D为任何值）为6D；
非铠装型（电缆外径D≤25）为4D；
（电缆外径D＞25）为6D。
1: Long term working temperature allowed by cable
is 60℃.
2: Min. bending radius of cable for installation is 6
times that of cable OD for cable with metallic shielding
and armoring(D is for any value.)and 4 times that of cable
OD for cable without armoring(D≤25 ); Min. bending radius of cable for installation is 6 times that of cable OD(D
＞25 ).
Note: D means outer diameter of cable 三、型号、名称及敷设要求 Type, Descr ipt ion and Installat ion
Requirements
型 号
Type
名 称
Description
敷设要求
Installation requirements
CKVV/DA
聚氯乙烯绝缘聚氯乙烯护套船用控制电缆
Control cable with PVC insulation and sheath for ship
固定敷设特性代号：
D-符合单根垂直燃烧
试验
CKVV80/DA
聚氯乙烯绝缘和护套裸铜丝编织铠装船用控制电缆
Control cable with PVC insulation and sheath, bare copper wire braiding and
armoring for ship
CKVV82/DA
聚氯乙烯绝缘铜丝编织铠装聚氯乙烯护套船用控制电缆
Control cable with PVC insulation and sheath, copper wire braiding and armoring for
ship
CKVV90/DA
聚氯乙烯绝缘聚氯乙烯内套裸钢丝编织铠装船用控制
电缆
Control cable with PVC insulation and inner sheath, bare steel wire braiding and
armoring for ship
CKVV92/DA
聚氯乙烯绝缘聚氯乙烯内套钢丝编织铠装聚氯乙烯
护套船用控制电缆
Control cable with PVC insulation and inner sheath, PVC outer sheath, steel wire
braiding and armoring for ship
CKJV/DA
交联聚乙烯绝缘聚氯乙烯护套船用控制电缆
Control cable with XLPE insulation and PVC sheath for ship
固定敷设特性代号：
D-符合单根垂直燃烧
试验
CKJV80/DA
交联聚乙烯绝缘和护套裸铜丝编织铠装船用控制电缆
Control cable with XLPE insulation and sheath, bare copper wire braiding and
armoring for ship
CKJV82/DA
交联聚乙烯绝缘铜丝编织铠装聚氯乙烯护套船用控制电缆
Control cable with XLPE insulation and PVC sheath, copper wire braiding and
armoring for ship
CKJV90/DA
交联聚乙烯绝缘聚氯乙烯内套裸钢丝编织铠装船用
控制电缆
Control cable with XLPE insulation and PVC inner sheath, bare steel wire braiding
and armoring for ship
CKJV92/DA
交联聚乙烯绝缘聚氯乙烯内套钢丝编织铠装聚氯乙烯护套船用控制电缆
Control cable with XLPE insulation and PVC inner sheath, PVC outer sheath, steel
wire braiding and armoring for ship、规格范围 Specification Range
型号
Type
芯数
Core number
截面mm2
（根数/单丝直径）
Cross section area (pieces/diameters of single piece )
所有型号
All types
2、4、7、10、14、19、24、30、37
0.75（7/0.37）、1.0（7/0.43）
1.5（7/0.52）、2.5（7/0.68）
四、船用控制电缆CKVV/DACKVV82/DACKVV92/DA技术要求 Technical Requirements
1、电缆应经受交流电压1500V或直流电压3600V，5min
的电压试验；
2、电缆具有符合GB、T19666-2005单根垂直燃烧试验
性能要求；
3、C K V系列电缆在2 0℃时绝缘电阻常数不小于
36.7MΩ.km；CKJ系列电缆在20℃时绝缘电阻常数不小于
3670MΩ.km。
1: Cable should bear voltage test of AV 1500V or DC
3600V for 5min.
2: Vertical burning test performance for single piece
shall meet the requirement of GB/T19666-2005 standard.
3: Insulated resistance constant is no less than
36.7MΩ.km at 20℃ for CKV series cable and 3670MΩ.
km at 20℃ for CKJ series cable.
六、交货要求 Delivery length
按双方协议规定，长度计量误差为±0.5%。 According to the agreement between both parties
with length error of ±0.5%.