$item.Name

首页>食品通用设备>其它通用设备>其它通用设备

JN型系列多功能酒精回收浓缩器

型号
重庆嵩康机械设备有限公司 0免费会员 生产厂家

该企业相似产品

发酵罐,提取罐,浓缩器

重庆嵩康机械设备有限公司是制造制药、化工、食品设备生产厂家、现公司主要生产中药提取浓缩、酒精回收全套设备、大输液、水针、口服液等各种液体制剂配料系统,生物、血液制品项目各种工业单元模块,幷承担工艺、高纯液体、高纯气体、CIP 、SIP各种洁净路系统和控制系统的设计、制造、安装工程等。自从2001年推出国内*台全自动CIP清洗系统以来,经过数年的发展,在CIP技术上又取得长足的进步和发展,成为国内采用*技术,种类较齐全,*大的CIP清洗系统供货商。

详细信息

JN

型系列多功能酒精回收浓缩器

JN MODEL SERIES MULTIFUNCTIONAL ALCOHOL RECOVERY CONCENTRATOR

本设备适用于中药、西药、葡萄糖、酿酒、淀粉、口服液、化工、食品、味精等工业酒精回收,能用于批量小、品种多的热敏性低温真空浓缩。

The equipment is applicable for industrial alcohol recycling of traditional Chinese medicine, Western medicine, glucose, wine brewing, starch, oral liquid, chemical industry, food and monosodium glutamate. It can be used in the low temperature vacuum concentration of heat sensitive substances with small batches and large varieties.

设备特点

1.

酒精回收:回收能力大,采用真空操作方法,改进了设备的工艺流程。回收率能达到

95%

,使酒精损耗率低于

5%

。能耗降低

30%

,具有投资小,回收效益高的节能设备。

2.

浓缩液料:本设备采用外加热自然型循环式与真空负压蒸发方式,能具有蒸发速度快,浓缩比重可达(

1.4

);液料在全密封中无泡沫浓缩,用本设备浓缩出来的药液,具有无污染,药味浓。清洗方便,打开加热器上下盖即可。操作简单,占地面积小,外形美观,加热器、蒸发器、保温完整出厂,本设备与液料接触部位均采用不锈钢

AISI304

制造,保温采用聚胺脂发泡或珍珠棉,外表面磨砂亚光处理,符合

GMP

医药标准。

EQUIPMENT CHARACTERISTICS

1. Alcohol recovery: Large recovery capacity. Adopt vacuum operation method and improve the process flow of device. The recovery rate can amount to 95%, the loss rate of alcohol is lower than 5%, and the energy consumption is 30% reduced. It is the energy saving equipment with small investment and high recovery benefit.

2. Liquid concentration: The equipment adopts external heating natural cycling mode and vacuum negative pressure evaporating mode, with instant evaporation and great concentrated specific gravity up to 1.4. The liquid materials are concentrated without foam under the completely sealed status. The liquid medicine concentrated from the equipment has no pollution, and has strong flavor of medicine. The cleaning is convenient. Just open the upper and lower covers of the heater. The operation is convenient, the space is small, the appearance is beautiful and the heater, evaporator and heat preservation are completely equipped before leaving the factory. The parts of the equipment contacting with liquid materials are made of AISI304 stainless steel. The heat preservation adopts polyurethane foaming or pearl cotton and the exterior surface adopts grinding semi-luster polishing. It is in accordance with GMP medicine standard.

相关技术文章

同类产品推荐

产品参数

规格类型

企业未开通此功能
详询客服 : 0571-87858618
提示

请选择您要拨打的电话: