Technical Data

Fluid: Compressed air

Maximum pressure:

Transparent bowl: 10 bar (150 psig)

Metal bowl: 17 bar (250 psig)

原装NORGREN F39-100-M0TGOperating temperature:*

Transparent bowl: -20° to +50°C (0° to +125°F)

Metal bowl: -20° to +65°C (0° to +150°F)

* Air supply must be dry enough to avoid ice formation at temperatures below

+2°C (+35°F)

Particle removal: Down to 0.01 μm

Air quality: Within ISO 8573-1, Class 1 (particulates) and

Class 2 (oil content)

Maximum remaining oil content of air leaving the filter: 0.01ppm at

+21°C (+70°F) with an inlet oil concentration of 17 ppm.

Maximum flow with 6,3 bar (90 psig) inlet pressure ? :

G1/8 ports, 2,8 dm 3 /s (6.0 scfm)

G1/4 ports, 3 dm 3 /s (6.36 scfm)

?

Maximum flow to maintain stated oil removal performance.

Nominal bowl size: 31 ml (1 fluid ounce)

Drain connection: 1/8 " pipe

原装NORGREN F39-100-M0TGAutomatic drain operation: Spitter type drain operates momentarily

when a rapid change in air flow occurs or when the supply

pressure is reduced.

Materials:

Body: Zinc

Bowl:

Transparent: Polycarbonate

Metal: Zinc

Element: Synthetic fiber and polyurethane foam

Elastomers: Neoprene & nitrile

Ordering Information

See  Ordering Information  on the following

pages.

ISO Symbols

Automatic drain Manual drain

Back to Selector Page

N/AL.8.300.105.02 5/98

Typical Performance Characteristics

F39

Our policy is one of continuous research and development.

We reserve the right to amend, without notice, the specifications given in this document.

Wall Mounting Bracket

and Body Screws

5939-06

Accessories

Saturated Flow* Dry Flow?

Port Size Model Numbers Flow dm 3 /s (scfm)  Flow dm 3 /s (scfm)  Weight kg (lbs)

G1/8 F39-100-A0TG 2,8 (6.0) 5,3 (11.2) 0.13 (0.28)

G1/4 F39-200-A0TG 3,0 (6.4) 5,8 (12.2) 0.13 (0.28)

Ordering Information. Models listed include ISO G threads, automatic drain and transparent bowl.

* Approximate flow at 6,3 bar (90 psig) inlet pressure and 0,3 bar (5 psig) pressure drop.

? Dry flows apply only when all oil, water, and other aerosols are removed.

Alternative Models

3 F 9 # # # #

# -

# #  -

Port Size Substitute

1/8 " 1

1/4 " 2

Threads Substitute

PTF A

ISO Rc taper B

ISO G parallel G

Option Substitute

Not applicable 0

Bowl Substitute

Transparent T

Metal M

Option Substitute

Not applicable 0

Element Substitute

Coalescing 0

Drain Substitute

Automatic A

Manual M

Constant bleed B

INLET PRESSURE MAXIMUM FLOW ?

bar (psig) dm 3 /s (scfm)

1 (15) 1,2 (2.5)

3 (45) 2,0 (4.2)

5 (70) 2,7 (5.7)

6,3 (90) 3,0 (6.4)

7 (100) 3,1 (6.6)

9 (130) 3,6 (7.6)

? Maximum flow to maintain stated oil removal performance.

4 (0.157) Dia **

13 (0.5) Deep **

Automatic Drain Manual Drain

37 (1.45)

23

(0.91)

19

(0.73)

23

(0.91)

154 (6.07) *

10 (0.38)

104 (4.10)

158 (6.22) *

10 (0.38)

108 (4.25)

42 (1.63)

Constant Bleed Drain

(Transparent Bowl)

135 (5.32) *

10 (0.38)

92 (3.62)

? 6 (0.24)

Constant Bleed Drain

(Metal Bowl)

136 (5.32) *

10 (0.38)

93 (3.66)

? 6 (0.24)

5/98 N/AL.8.300.105.03

Dimensions mm (inches)

F39

Our policy is one of continuous research and development.

We reserve the right to amend, without notice, the specifications given in this document.

Bracket Mounting

Use 1/8 " (3 mm) screws to mount bracket to wall.

* Minimum clearance to remove bowl.

** Mounting holes.

34 (1.34)

52 (2.06) 35 (1.39)

6 (0.22)

43 (1.71)

38 (1.50)

24

(0.93)

7 (0.29)

Service Kits

Item Type Part number

Service kit All models 4141-10

Replacement drains

Manual 773-03

Automatic 3654-02